Kontent qismiga oʻtish

Andoza:Maydondagi futbol jamoasi/doc

Vikipediya, ochiq ensiklopediya

This template is used to generate an image map, showing the members of an association football squad on a football pitch. The position names and locations are specified per association football positions. The template does not check to make sure there are the correct number of players on the field.

GK
RCB
LCB
RB
LB
RCM
LCM
RW
LW
SS
CF
{{Maydondagi futbol jamoasi
| GK_nat  = | GK  =
| RB_nat  = | RB  =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat  = | LB  =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| SS_nat  = | SS  =
| RW_nat  = | RW  =
| LW_nat  = | LW  =
| CF_nat  = | CF  =
}}

GK
RCB
LCB
RB
LB
RCM
LCM
RW
LW
AM
CF
{{Maydondagi futbol jamoasi
| GK_nat  = | GK  =
| RB_nat  = | RB  =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat  = | L  =
| RCM_nat = | Fıtı =
| LCM_nat = | Efser =
| AM_nat  = | Veysel  =
| RW_nat  = | Feqan  =
| LW_nat  = | Bunyad  =
| CF_nat  = | Nesirov  =
}}

GK
RCB
LCB
RB
LB
RCM
LCM
AM
RM
LM
CF
{{Maydondagi futbol jamoasi
| GK_nat  = | GK  =
| RB_nat  = | RB  =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat  = | LB  =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| AM_nat  = | AM  =
| RM_nat  = | RM  =
| LM_nat  = | LM  =
| CF_nat  = | CF  =
}}

GK
RCB
LCB
RB
LB
RCM
LCM
RW
LW
RCF
LCF
{{Maydondagi futbol jamoasi
| GK_nat  = | GK  =
| RB_nat  = | RB  =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat  = | LB  =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| RW_nat  = | RW  =
| LW_nat  = | LW  =
| RCF_nat = | RCF =
| LCF_nat = | LCF =
}}

GK
RCB
LCB
RB
LB
RCM
LCM
RW
LW
RCF
LCF
{{Maydondagi futbol jamoasi|image=striped
| GK_nat  = | GK  =
| RB_nat  = | RB  =
| RCB_nat = | RCB =
| LCB_nat = | LCB =
| LB_nat  = | LB  =
| RCM_nat = | RCM =
| LCM_nat = | LCM =
| RW_nat  = | RW  =
| LW_nat  = | LW  =
| RCF_nat = | RCF =
| LCF_nat = | LCF =
}}

The XX_nat parameters may be used to add national flags for the players. The ISO country code must be supported by {{flagicon}}.

Alignment and width

[manbasini tahrirlash]

By default, the diagram will float to the center of the page or column. To float the diagram to the left, use |align=left. To float the diagram to the right, use |align=right.

By default, the diagram width is set to 200px. To change the width, use |width=NUM, where NUM is a raw number, without the px units.

If the label is too long, and is being clipped on the left or right edge of the diagram, try shifting it using |POS_shift=num, where POS is the position and num is a raw number in em units. This feature is currently only enabled for positions near the left and right edge of the diagram.

To add a caption, use |caption=.

Background image

[manbasini tahrirlash]

To use a striped image, instead of the default checked image, use |image=striped.